Spacer Cards
Spacer Cards, sometimes improperly called Print Test Cards, were card-shaped swatches of color inserted into Uncut Sheets as a means of marking where one series of cards ended and another began. These were most commonly used in uncut sheets of Starter Decks, where a single sheet of 11x11 cards could exactly fit 2 60-card decks with a single spacer card in between (60 + 60 + 1 = 121 = 11 x 11).
Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.
This became such a frequent occurrence that Decipher ended up inserting a more obvious spacer card, which was much harder to miss. This 4-color spacer was used for starter decks in the Shadows set, and as a result spacer cards became much less frequent as an accidental inclusion, even if they weren't completely eliminated. For unknown reasons, Black Rider starter decks reverted to using the full black spacer card.
The style of the color spacer card used by Decipher changed with the release of Bloodlines, switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by each international partner (who handled translation and layout alteration of Decipher's master version); in earlier sets a completely white or unprinted spacer can be seen on uncut international sheets.
The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for Bloodlines and The Hunters (see gallery below). The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown. Due to the nature of how foiling works, it can be difficult to tell the difference, as the foiling layer does not look reflective if ink is printed on it, particularly with coverage as complete as on the spacer card. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.
Besides the broad strokes, there is no way to differentiate what set or pack a spacer card was printed in, so the only way to know is if the collector recorded it at the time the card was pulled from a pack.
Gallery
Click through to any image to see its full resolution.
-
Black spacer card used for the first half of the game's lifetime.
-
4-color spacer card.
-
5-color spacer card.
-
Photo of the two color test print cards.
-
Uncut Rare Foil sheet for The Hunters. The spacer divides the Hunters cards proper from prints of The Wraith Collection and various promos.
-
Detail of the 5-color spacer within the RF Hunters sheet.
-
Detail showing the roughed-up edge of a 5-color spacer card, where the foiling layer has been exposed.
| LOTR-TCG Product |
|---|
