Editing Spacer Cards

From LOTR-TCG Wiki
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 5: Line 5:
Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes.  Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.
Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes.  Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.


This became such a frequent occurrence that Decipher ended up inserting a more obvious spacer card, which was much harder to miss.  This 4-color spacer was used for starter decks in the [[Shadows]] set, and as a result spacer cards became much less frequent as an accidental inclusion, even if they weren't completely eliminated. For unknown reasons, [[Black Rider]] starter decks reverted to using the full black spacer card.  
This became such a frequent occurrence that Decipher ended up requesting a more obvious spacer card, which was much harder to miss.  This transition happened sometime around [[Shadows]], and as a result spacer cards became much less frequent as an accidental inclusion, even if they weren't completely eliminated.


The style of the color spacer card used by Decipher changed with the release of [[Bloodlines]], switching from a 4-color style to a 5-color one.  There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by each international partner (who handled translation and layout alteration of Decipher's master version); in earlier sets a completely white or unprinted spacer can be seen on uncut international sheets.  
The style of the color spacer card used by Decipher changed with the release of [[Bloodlines]], switching from a 4-color style to a 5-color one.  There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by each international partner (who handled translation and layout alteration of Decipher's master version).  


The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[Bloodlines]] and [[The Hunters]] (see gallery below).  The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown.  Due to the nature of how foiling works, it can be difficult to tell the difference, as the foiling layer does not look reflective if ink is printed on it, particularly with coverage as complete as on the spacer card. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.
The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[Bloodlines]] and [[The Hunters]] (see gallery below).  The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown.  Due to the nature of how foiling works, it can be difficult to tell the difference, as the foiling layer does not look reflective if ink is printed on it, particularly with coverage as complete as on the spacer card. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.
Please note that all contributions to the LOTR-TCG Wiki may be edited, altered, or removed by other contributors. Your writing is liable to be edited mercilessly, so be sure to back up any major claims with links if possible.

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)

Templates used on this page: