Print Test Cards - Revision history

Teltura: Redirected page to Spacer Cards

2023-07-03T17:58:19Z

Redirected page to Spacer Cards

← Older revision		Revision as of 17:58, 3 July 2023
Line 1:		Line 1:
	#REDIRECT [[Spacer Cards		#REDIRECT [[Spacer Cards]]

Teltura: Removed redirect to Spacer

2023-07-03T17:57:18Z

Removed redirect to Spacer

← Older revision		Revision as of 17:57, 3 July 2023
Line 1:		Line 1:
	#REDIRECT [[Spacer]]		#REDIRECT [[Spacer Cards

Teltura: Redirected page to Spacer

2023-07-03T17:56:28Z

Redirected page to Spacer

← Older revision		Revision as of 17:56, 3 July 2023
Line 1:		Line 1:
	[[~~File:LOTR-EN00B002.0_card.jpg\|frame\|right\|4-color Test Print or~~ Spacer ~~card.~~]]		#REDIRECT [[Spacer]]

	'''Print Test Cards''', more properly called '''Spacer Cards''', were card-shaped swatches of color inserted into [[Uncut Sheet]]s as a means of marking where one series of cards ended and another began. These were most commonly used in uncut sheets of [[Starter Decks]], where a single sheet of 11x11 cards could exactly fit 2 60-card decks with a single spacer card in between (60 + 60 + 1 = 121 = 11 x 11).

	Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.

	This became such a frequent occurrence that Decipher ended up requesting a more obvious spacer card, which was much harder to miss. This transition happened sometime around [[Shadows]], and as a result spacer cards became much less frequent as an accidental inclusion, even if they weren't completely eliminated.

	The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.

	The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[The Hunters]] (see gallery below). The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown. Due to the nature of how foiling works, it can be difficult to tell the difference, as the foiling layer does not look reflective if ink is printed on it, particularly with coverage as complete as on the spacer card. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.

	Besides the broad strokes, there is no way to differentiate what set or pack a spacer card was printed in, so the only way to know is if the collector recorded it at the time the card was pulled from a pack.

	~~{{clear}}~~

	~~== Gallery ==~~

	~~''Click through to any image to see its full resolution.''~~

	~~<gallery widths=600px heights=400px mode=packed>~~
	~~File:LOTR-EN00B001.0_card.jpg\|Black spacer card used for the first half of the game's lifetime.~~
	~~File:LOTR-EN00B002.0_card.jpg\|4-color spacer card.~~
	~~File:LOTR-EN00B003.0_card.jpg\|5-color spacer card.~~
	~~File:color_prints.jpg\|Photo of the two color test print cards.~~
	~~File:Uncut_Sheet_15-RF-01.jpg\|height=500px\|Uncut Rare Foil sheet for [[The Hunters]]. The spacer divides the Hunters cards proper from prints of [[The Wraith Collection]] and various promos.~~
	~~File:Uncut_Sheet_15-RF-02.jpg\|Detail of the 5-color spacer within the RF Hunters sheet.~~
	~~File:color_print_foil.jpg\|Detail showing the roughed-up edge of a 5-color spacer card, where the foiling layer has been exposed.~~
	~~</gallery>~~


	~~----~~


	~~{{Product_Table}}~~

Teltura: removing obsolete distribution table

2023-02-13T04:20:15Z

removing obsolete distribution table

← Older revision		Revision as of 04:20, 13 February 2023
Line 33:		Line 33:


	{{~~Card Distribution Table~~}}		{{Product_Table}}

Teltura at 01:24, 24 November 2022

2022-11-24T01:24:37Z

← Older revision		Revision as of 01:24, 24 November 2022
Line 24:		Line 24:
	File:LOTR-EN00B003.0_card.jpg\|5-color spacer card.		File:LOTR-EN00B003.0_card.jpg\|5-color spacer card.
	File:color_prints.jpg\|Photo of the two color test print cards.		File:color_prints.jpg\|Photo of the two color test print cards.
	File:Uncut_Sheet_15-RF-01.jpg\|height=500px\|Uncut Rare Foil sheet for [[The Hunters]]. The ~~bottom contains~~ the ~~9 [[Legends Masterworks]]~~ cards ~~and two copies~~ of the 18 [[Legends]] Rare Foils. The rest of the sheet above the spacer contains {{Card\|0P123}}, {{Card\|0P124}}, {{Card\|0P125}}, {{Card\|0P126}}, {{Card\|0D9}}, {{Card\|0D10}}, {{Card\|0D11}}, {{Card\|0D12}}, and six copies of set 16 [[The Wraith Collection]].		File:Uncut_Sheet_15-RF-01.jpg\|height=500px\|Uncut Rare Foil sheet for [[The Hunters]]. The spacer divides the Hunters cards proper from prints of [[The Wraith Collection]] and various promos.
	File:Uncut_Sheet_15-RF-02.jpg\|Detail of the 5-color spacer within the RF Hunters sheet.		File:Uncut_Sheet_15-RF-02.jpg\|Detail of the 5-color spacer within the RF Hunters sheet.
	File:color_print_foil.jpg\|Detail showing the roughed-up edge of a 5-color spacer card, where the foiling layer has been exposed.		File:color_print_foil.jpg\|Detail showing the roughed-up edge of a 5-color spacer card, where the foiling layer has been exposed.

Teltura at 13:05, 25 February 2022

2022-02-25T13:05:19Z

← Older revision		Revision as of 13:05, 25 February 2022
Line 5:		Line 5:
	Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.		Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.

	This became such a frequent occurrence that Decipher ended up requesting a more obvious spacer card, which was much harder to miss. This transition happened sometime around [[Shadows]], and as a result spacer cards became much less frequent of an accidental inclusion, even if they weren't completely eliminated.		This became such a frequent occurrence that Decipher ended up requesting a more obvious spacer card, which was much harder to miss. This transition happened sometime around [[Shadows]], and as a result spacer cards became much less frequent as an accidental inclusion, even if they weren't completely eliminated.

	The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.		The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.

Teltura: adding foil image

2022-02-25T13:02:14Z

adding foil image

← Older revision		Revision as of 13:02, 25 February 2022
Line 24:		Line 24:
	File:LOTR-EN00B003.0_card.jpg\|5-color spacer card.		File:LOTR-EN00B003.0_card.jpg\|5-color spacer card.
	File:color_prints.jpg\|Photo of the two color test print cards.		File:color_prints.jpg\|Photo of the two color test print cards.
			File:Uncut_Sheet_15-RF-01.jpg\|height=500px\|Uncut Rare Foil sheet for [[The Hunters]]. The bottom contains the 9 [[Legends Masterworks]] cards and two copies of the 18 [[Legends]] Rare Foils. The rest of the sheet above the spacer contains {{Card\|0P123}}, {{Card\|0P124}}, {{Card\|0P125}}, {{Card\|0P126}}, {{Card\|0D9}}, {{Card\|0D10}}, {{Card\|0D11}}, {{Card\|0D12}}, and six copies of set 16 [[The Wraith Collection]].
	File:Uncut_Sheet_15-RF-01.jpg\|Uncut Rare Foil sheet for [[The Hunters]]. The bottom contains the 9 [[Legends Masterworks]] cards and two copies of the 18 [[Legends]] Rare Foils. The rest of the sheet above the spacer contains {{Card\|0P123}}, {{Card\|0P124}}, {{Card\|0P125}}, {{Card\|0P126}}, {{Card\|0D9}}, {{Card\|0D10}}, {{Card\|0D11}}, {{Card\|0D12}}, and six copies of set 16 [[The Wraith Collection]].
	File:Uncut_Sheet_15-RF-02.jpg\|Detail of the 5-color spacer within the RF Hunters sheet.		File:Uncut_Sheet_15-RF-02.jpg\|Detail of the 5-color spacer within the RF Hunters sheet.
			File:color_print_foil.jpg\|Detail showing the roughed-up edge of a 5-color spacer card, where the foiling layer has been exposed.
	</gallery>		</gallery>

Teltura: fixing error in foiling section

2022-02-25T12:48:13Z

fixing error in foiling section

← Older revision		Revision as of 12:48, 25 February 2022
Line 9:		Line 9:
	The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.		The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.

	The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[The Hunters]] (see gallery below). The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown. Due to the nature of how foiling works, it can be difficult to tell the difference, as the ~~white ink~~ layer ~~that brings out the~~ reflective ~~glint~~ is ~~not applied~~. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.		The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[The Hunters]] (see gallery below). The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown. Due to the nature of how foiling works, it can be difficult to tell the difference, as the foiling layer does not look reflective if ink is printed on it, particularly with coverage as complete as on the spacer card. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.

	Besides the broad strokes, there is no way to differentiate what set or pack a spacer card was printed in, so the only way to know is if the collector recorded it at the time the card was pulled from a pack.		Besides the broad strokes, there is no way to differentiate what set or pack a spacer card was printed in, so the only way to know is if the collector recorded it at the time the card was pulled from a pack.

Teltura at 12:44, 25 February 2022

2022-02-25T12:44:33Z

← Older revision		Revision as of 12:44, 25 February 2022
Line 1:		Line 1:
	[[File:LOTR-EN00B002.0_card.jpg\|frame\|right\|4-color Test Print or Spacer card.]]		[[File:LOTR-EN00B002.0_card.jpg\|frame\|right\|4-color Test Print or Spacer card.]]

	'''Test ~~Print~~ Cards''', more properly called '''Spacer Cards''', were card-shaped swatches of color inserted into [[Uncut Sheet]]s as a means of marking where one series of cards ended and another began. These were most commonly used in uncut sheets of [[Starter Decks]], where a single sheet of 11x11 cards could exactly fit 2 60-card decks with a single spacer card in between (60 + 60 + 1 = 121 = 11 x 11).		'''Print Test Cards''', more properly called '''Spacer Cards''', were card-shaped swatches of color inserted into [[Uncut Sheet]]s as a means of marking where one series of cards ended and another began. These were most commonly used in uncut sheets of [[Starter Decks]], where a single sheet of 11x11 cards could exactly fit 2 60-card decks with a single spacer card in between (60 + 60 + 1 = 121 = 11 x 11).

	Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.		Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.

Teltura: created article

2022-02-25T12:38:25Z

created article

New page

[[File:LOTR-EN00B002.0_card.jpg|frame|right|4-color Test Print or Spacer card.]]

'''Test Print Cards''', more properly called '''Spacer Cards''', were card-shaped swatches of color inserted into [[Uncut Sheet]]s as a means of marking where one series of cards ended and another began. These were most commonly used in uncut sheets of [[Starter Decks]], where a single sheet of 11x11 cards could exactly fit 2 60-card decks with a single spacer card in between (60 + 60 + 1 = 121 = 11 x 11).

Starter decks were assembled by hand after being cut, meaning that a worker would take the stack of 121 cards, search for the spacer in the middle, and then place the two 60-card decks into their appropriate boxes. Since this was a manual process, the spacer card had a chance of slipping into the starter box unnoticed, which was the primary way in which these spacers would make their way onto the market.

This became such a frequent occurrence that Decipher ended up requesting a more obvious spacer card, which was much harder to miss. This transition happened sometime around [[Shadows]], and as a result spacer cards became much less frequent of an accidental inclusion, even if they weren't completely eliminated.

The style of the color spacer card changed sometime around the printing of [[The Hunters]], switching from a 4-color style to a 5-color one. There is some speculation that international printings may have also used this 5-color version at an earlier date, as the specifics of the color swatch selected were likely a minor detail controlled by the printing company itself.

The 5-color version exists in both foil and nonfoil variants, as the spacer was used in the RF sheet for [[The Hunters]] (see gallery below). The black spacer also exists in a foil variant, although the origin for this is more obscure and currently unknown. Due to the nature of how foiling works, it can be difficult to tell the difference, as the white ink layer that brings out the reflective glint is not applied. Typically the only way to tell is if the foiling is exposed around the cut edge, or if a nick or scrape on the card's face cuts into the ink and reveals the foiling beneath.

Besides the broad strokes, there is no way to differentiate what set or pack a spacer card was printed in, so the only way to know is if the collector recorded it at the time the card was pulled from a pack.

{{clear}}

== Gallery ==

''Click through to any image to see its full resolution.''

<gallery widths=600px heights=400px mode=packed>
File:LOTR-EN00B001.0_card.jpg|Black spacer card used for the first half of the game's lifetime.
File:LOTR-EN00B002.0_card.jpg|4-color spacer card.
File:LOTR-EN00B003.0_card.jpg|5-color spacer card.
File:color_prints.jpg|Photo of the two color test print cards.

File:Uncut_Sheet_15-RF-01.jpg|Uncut Rare Foil sheet for [[The Hunters]]. The bottom contains the 9 [[Legends Masterworks]] cards and two copies of the 18 [[Legends]] Rare Foils. The rest of the sheet above the spacer contains {{Card|0P123}}, {{Card|0P124}}, {{Card|0P125}}, {{Card|0P126}}, {{Card|0D9}}, {{Card|0D10}}, {{Card|0D11}}, {{Card|0D12}}, and six copies of set 16 [[The Wraith Collection]].
File:Uncut_Sheet_15-RF-02.jpg|Detail of the 5-color spacer within the RF Hunters sheet.
</gallery>

----

{{Card Distribution Table}}